Akai MPC 2000XL User Manual

Chapter 4: Editing Sequences
Page 73
Rearranging the tracks
This allows you to rearrange/move tracks within a sequence.
From the the Main Screen, press EDIT [F2] to display the Event Copy screen and press
TrMOVE [F3].
.......................................................
...............
Sq:80-Sequence80
TrMOVE SELECTEVENTS BARS
Select trackSelect track
to move.
Tr:01-(Unused)
Tr:02-(Unused)
Tr:03-(Unused)
USER
Select the sequence in the Sq: field and then move the cursor to the field where the track is
displayed using the CURSOR DOWN key. Select the track that you want to move with the DATA
wheel and press SELECT [F6].
.......................................................
...............
Sq:80-Sequence80
CANCEL
Tr:01-(Unused)
Tr:03-(Unused)
Tr:02-(Unused)
INSERT
The selected track moves to the left. If you rotate the DATA wheel again, the list on the right will
scroll.
.......................................................
...............
Sq:80-Sequence80
CANCEL
Tr:07-(Unused)
Tr:08-(Unused)
Tr:02-(Unused)
INSERT
When you reach the place that you want to insert the track, press INSERT [F6].
.......................................................
...............
Sq:80-Sequence80
TrMOVE SELECTEVENTS BARS
Select trackSelect track
to move.
Tr:05-(Unused)
Tr:06-(Unused)
Tr:07-(Unused)
USER
The track name remains the same as the original and the new track numbers are set in order.

Akai MPC 2000XL Specifications

General

Polyphony	32 voices
Sampling Frequency	44.1 kHz
Sampling Resolution	16-bit
Sample Memory	2MB standard, expandable to 32MB
Pads	16 velocity-sensitive pads
Sequencer Resolution	96 PPQN
Outputs	8 individual outputs, stereo master output
Filter	Digital resonant filter
Display	240 x 64 pixel LCD
Type	Sampler/Sequencer
Storage	3.5" floppy disk
Effects	Optional effects board
Power Supply	AC 100-240V, 50/60 Hz
Maximum Sampling Time	22.8 minutes (with 32 MB RAM)