Chapter 10: Disk Operation
Page 152
Overview
When the power is turned off, all of the data will be erased. If you have any data that you want to
keep, make sure that you save the data to a disk before the power is turned off.
The data will be saved as a file and you can name the file using up to 16 characters. There are two
ways that you can save data on the MPC2000XL. One is by using the internal floppy disk drive,
and the other is by connecting SCSI devices (such as MO, ZIP or hard disk drives) to the rear
panel SCSI socket.
Disk mode screen
Hold down SHIFT and press LOAD (numeric pad 3). The following screen appears.
The Device: Field
In disk mode, most of the screens contain a Device: field. This selects which disk to work on
when you operate various functions in disk mode and should be set first.
The Device Icons
When you select the disk in the Device: field in Disk mode, the following icons appear accord-
ing to the type of disk selected.
Floppy
When Floppy is selected, the floppy icon appears. The display also indicates whether the disk is
2DD or 2HD.
Note: If the disk is not formatted, the MPC2000XL will not be able to make an indica-
tion.
SCSI
There are various types of SCSI devices. The MPC2000XL will display an icon according to the
type of device connected to the MPC2000XL.
Hard disk
CD-ROM drive
MO drive
SAVE FORMAT SETUP DO ITLOAD
View:ALL FilesView:ALL Files
File:LOOP_1 .SND Size= 862K
Device:Floppy Free Free memory
snd= 1900K
Type=MPC2000XL seq= 2624K
LOAD
.......................................................................................................................
To Next Page
Loading...
Need help?
General
