Chapter 11: Flash ROM
Page 174
Saving to Flash ROM
You can save data into flash ROM in the same way you would a floppy disk or SCSI device. Hold
down SHIFT and press LOAD (numeric key 3) and then press SAVE [F2].
SAVE FORMAT SETUP DO ITLOAD
Type:Save All SequencesType:Save All Sequences
File:08-Sequence08 Size= 10K
Device:F-ROM
Free= 0K
Free= 0K
SAVE
.......................................................................................................................
File: This field selects the file that you want to save.
Device: Select F-ROM.
Frag'd= This field shows the hollow memory size of fragmented data. Please refer to Flash
ROM Fragmentation described later in the manual.
Press DO IT [F6].
Press SAVE [F5] to save the file.
Loading from Flash ROM
You can load data from flash ROM in the same way you would load from an ordinary disk. Hold
down SHIFT and press LOAD (numeric key 3) and then press LOAD [F1].
SAVE FORMAT SETUP DO ITLOAD
View:ALL FilesView:ALL Files
File: Size= 0K
Device:F-ROM Free Free memory
snd= 1900K
Type=No FROMType=No FROM seq= 2624K
LOAD
.......................................................................................................................
Move the cursor to the Device: field and select F-ROM. Move the cursor to the top right
folder field and press OPEN WINDOW to open the Directory window. You can also open the
Directory window by pressing OPEN WINDOW while the cursor is in the File: field.
Select a file with the CURSOR keys. Press Close [F4] to return to the LOAD screen and then
press DO IT [F6] to load the data.
Note: You cannot load a sound from flash ROM if you have a sound of the same
name in the MPC2000XL's RAM. (internal memory).
........................................................................................
............................
........................
CANCEL SAVE
File name:ALL_SEQ_SONG1 .ALL
....................................................................................
Save ALL file
To Next Page
Loading...
