Chapter 7: Creating and Editing Programs
Page 124
Setting the Filter
This edits the filter of the sound assigned to each note.
The filter has two parameters that you can edit. Select the parameter field you want to edit with the
CURSOR key and set the value with the DATA wheel.
...............................................................................................
Pgm: 1 Note:60/C05-OFF
<Envelope>
Attack: 0Attack: 0
Decay:100
Dcy md:END
Tune:-120
Voice
Overlap:
POLY
PLAY
PARAMS AUTODRUM PURGE
..................
..................
..........................
ASSIGN
<Filter>
Freq:100
Reson: 0Reson: 0
•
Freq:
This sets the cut off frequency of the filter. The smaller the value, the darker the sound
becomes.
•
Reson:
This sets the resonance of the filter. The larger the value, the more emphasized the
boarder of the cut off frequency is, creating a unique sound.
While one of the filter fields is selcted, press OPEN WINDOW to display the following window.
........................
......................................................................................................
.........................................................................................................
............................
CLOSE PLAY
Velo/Env >> filterVelo/Env >> filter
Note:60/C05-OFF
AttacK: 0
Decay: 0
Amount: 0
.....................................................................................................
Velo Freq:Velo Freq: 0
Velo:127
.............
Set the ratio in which the filter changes according to the settings of the filter envelope and velocity
here.
• Attack:
This sets the attack time of the filter envelope. The larger the value, the more time it takes
for the sound to clarify.
• Decay:
This sets the decay time of the filter envelope. The larger the value, the softer the decay of
the cut off frequency becomes.
• Amount:
This sets the depth of the filter envelope. The larger the value, the larger the effect of the
filter envelope becomes. The envelope is disabled when it is set to 0.
• Velo>Freq:
This allows the velocity to control the filter. The larger the value, the clearer the sound be-
comes with the impact of the velocity. When this is set to 0, the tone is the same regardless of
the velocity impact.
• Velo:
This displays the velocity in real time when the dum pad is hit.
To Next Page
Loading...
Need help?
General
