Chapter 7: Creating and Editing Programs
Page 123
CAUTION: When the sample is short, the decay time will have higher priority than the
attack time.
While one of the envelope fields is selcted, press OPEN WINDOW to display the following win-
dow.
........................
......................................................................................................
.........................................................................................................
............................
CLOSE PLAY
Velo >> PitchVelo >> Pitch
Note:60/C05-OFF
Velo Attack: 0Velo Attack: 0
Velo Start: 0Velo Start: 0
Velo Level:100
.....................................................................................................
Velo:127
You can set the ratio in which the envelope or volume changes according to the velocity.
•
Velo
44
44
4Attack:
This allows the velocity to control the attack time. The larger the value, the shorter the
attack time becomes with the impact of the velocity. When this is set to 0, the attack is the
same regardless of the velocity.
•
Velo
44
44
4Start:
This allows the velocity to control the starting point of the sample. The larger the value, the
slower the start of the sample becomes as the velocity is weaker. When this is set to 0, the
start is the same regardless of the velocity.
•
Velo
44
44
4Level:
This allows the velocity to control the volume. The larger the value, the louder the sample
becomes with the impact of the velocity. When this is set to 0, the volume is the same
regardless of the velocity.
•
Velo:
This field displays the velocity in real-time when the drum pad is hit.
To Next Page
Loading...
Need help?
General
