Akai MPC 2000XL User Manual

Chapter 4: Editing Sequences
Page 71
Transposing a Note
When TRANSPOSE is selected in the Edit: field the following screen is displayed.
◆ Left Window
•
Time:
Set the range of the event you want to edit.
•
Notes:
Set the note you want to edit. A pad number will appear if the track is a drum track, and a
note range will appear if the track is a MIDI track. You can directly set the note from a drum
pad or MIDI keyboard.
◆ Right Window
•
Edit sq:/ Tr:
To select the sequence and track that you want to edit.
•
Amount:
Set the amount to be transposed here (amounts are shown in semi-tone steps).
Note: Transpose will not function with the drum track.
.................................
Edit:TRANSPOSE
DO IT
EVENTS BARS
Time:
001.001.00-001.01.00
Notes:
ALL
Edit sq: 1Edit sq: 1 Tr: 1Tr: 1
 Amount: 0
(Except drum track)(Except drum track)
TrMOVE USER
◆ Right Window
•
Edit sq:/ Tr:
To select the sequence and track that you want to edit.
•
Mode:
ADD VALUE
Adds the value selected in the Value: field to the note.
SUB VALUE
Subtracts the value selected in the Value: field from the note.
MULTI VALUE %
Multiplies the velocity (percent) by the value selected in the Value: field.
SET TO VALUE
Sets the note to the velocity selected in the Value: field.
•
Value:
Set the value to be adjusted here.

Akai MPC 2000XL Specifications

General

Polyphony	32 voices
Sampling Frequency	44.1 kHz
Sampling Resolution	16-bit
Sample Memory	2MB standard, expandable to 32MB
Pads	16 velocity-sensitive pads
Sequencer Resolution	96 PPQN
Outputs	8 individual outputs, stereo master output
Filter	Digital resonant filter
Display	240 x 64 pixel LCD
Type	Sampler/Sequencer
Storage	3.5" floppy disk
Effects	Optional effects board
Power Supply	AC 100-240V, 50/60 Hz
Maximum Sampling Time	22.8 minutes (with 32 MB RAM)