K
B /,,,+!,
$D
The MPC5000 uses 18 preset algorithms to carry out the timestretch process, so you can select a preset that nearest resembles your
sample’s content. If the results are not to your liking, try experimenting with different presets. Each preset is divided into A, B or C:
A: Standard quality timestretch with fast processing.
B: Better quality timestretch with slower processing.
C: Highest quality timestretch with even slower processing.
&'$$#.$D
01. FEM VOX (Female Voice)
02. MALE VOX (Male Voice)
03. LOW MALE VOX (Low Male Voice)
04. VOCAL
05. HFREQ RHYTHM (High Frequency Rhythm Section)
06. MFREQ RHYTHM (Middle Frequency Rhythm Section)
07. LFREQ RHYTHM (Low Frequency Rhythm Section)
08. PERCUSSION
09. LFREQ PERC. (Low Frequency Percussion)
10. STACCATO
11. LFREQ SLOW (Low Frequency Slow Music)
12. MUSIC 1
13. MUSIC 2
14. MUSIC 3
15. SOFT PERC. (Soft Percussion)
16. HFREQ ORCH. (High Frequency Orchestra)
17. LFREQ ORCH. (Low Frequency Orchestra)
18. SLOW ORCH. (Slow Orchestra)
%@$
You can use this to ‘tweak’ the selected preset. If your selected preset is close to what you’re looking for, but still needs a little fine
tuning, try a few different settings here until you get the best result. A ( + ) value will help improve high frequency and percussive
sounds while a ( - ) value will help improve bass sound. Most of the time, this can be left at zero.
C 4-6);&0*
It may take some time to process depending on the length of the sample.
The Keep or Retry window will be displayed after executing the timestretch.
I+"'(I/(%
Set the name for the new sample
E0F9;
Auditions the new sample.
E*F9G;
Deletes the original sample and keep the new sample by pressing this button. The sample name remains.
E2F9&;
This will return to the Sample Edit window without keeping the new sample.
E F9:;
Allows you to save the new sample. You can also name the sample in the 'New Sample' field.
To Next Page
Loading...
