=C
+!%%
If you set this field to 0, the sample will be played back at the maximum level regardless of the amount of pressure. The larger you set the value,
the bigger the difference of the level will be.
B 4->6)I&/5*/
You can set more detailed settings for sample volume by using the other parameters in the Amp Envelope window. For more information about
setting them, see the section entitled 'Amplitude Envelope' on page 109.
D227//)U*
/#
(#$)+"'(+$#.
#
= 0/ 7&87+#
@ +,=,,@,
G 401;&6
This will open the PLAY MODE Window.
> 0,U,#D5I&0J
D)2$#C&
4->6)I&/5*.,I+J&;5,
B / ,7, ,=, # %
The 'Range' field has two fields to set the upper and the lower limits. You can set the lower limit in the left field and the upper limit in the right field.
Here, set the upper limit (the right field) to 63.
C / ,7, ,@, # %
In this example, set the lower limit (the left field) to 64.
A
If you hit the pad hard, the MPC5000 will play the sample assigned to the 2' field. If you hit the pad softly, the MPC5000 will play the sample
assigned to the '1' field.
,=IM9=I6;&#/'=I6
'&
CA72-J&*A72-J=<>&
)#(+$#.
/ L 0#
3=#@#G#>#=#@#G#>O
/#3
= -7&87+#/
@ 401;&6
G /,U,JI5
"%'+"'(+$#.
7#%
#
7U#3
> -7&87+#7//
401;&6
B /,U,7+1;&
To Next Page
Loading...
