&/
=CA
#
This parameter displays how many voices are currently being used. The MPC5000 can play up to 64 voices simultaneously.
5"$
This parameter sets the date for the internal clock.
&'
This parameter sets the MPC5000's internal clock.
"(8"$
This parameter is used if the clock drifts slightly over long periods of time. (For example, over a month).
(#+$$
This enables or disables the internal clock. The internal clock should not be disabled unless the MPC5000 is going to be stored over
a long period of time.
6$"(Q&"#$)5/"($
)*%-
J'L-
= 457+/56
@ 7457+/564)MM(*6
Now the MPC5000 is reset to the Factory Preset settings. The following global settings are stored in the MPC5000:
Timing Correct (all values) Record Aftertouch
Click/Metronome (all values) Tap average
Step Edit Options (Auto Step Increment, Record Note Duration) Flash Tempo LED
Active track receive channel Mute/Stop of One Shot Samples
Soft thru ADAT Channel
Sequence Change by Program Change Footswitches
Pad to Internal Sounds Pad Sensitivity and Curve
Sync in Autoload
Sync out Mute Options (Record, Play, Instant)
Master level Mixer Automation Record Options
Sustain pedal to duration Record Sample Options
Truncate duration Record Aftertouch
$"%$.
0&7+1390/:;+57&5;:750II57+/5+II:/57;++
%##-:/(
= /%&/7&&-
@ 0-&/
G 4@64G6
> ( # 'L
##457+/56
To Next Page
Loading...
