Akai MPC 5000 - Page 24

0
=

9:J
1
%%
 $$#$$)="'(

= 4/575&&:6
This will allow the main mix of your MPC to be heard.
@ 4+//081+(I50F&:/6'9;
This will allow individual samples and sounds to be sent individually to be recorded.
Other examples of ways you can connect your MPC5000's outputs include connecting the [STEREO OUT] to a mixing board to mix the MPC
alongside other instruments, and using the [ASSIGNABLE MIX OUTS] to send certain sounds to external effects processors.
#&.(#+"'/0
 '#"&
 "(6$#$$)="'(

= L475&7;016!
Sources plugged into the [RECORD IN] jacks can be sampled to be used in Sample Programs. The [RECORD-IN] jacks are 1/4" / Mic combo
jacks, allowing either type of connector to be used. The input level for this jack is controlled using the [REC GAIN] knob.
00/A@+#
9;7/B=9;7
#'1!2-)3%&"
&(''
'