/"
G@
Sets the 'MSB' (Control Change # 0) and 'LSB' (Control Change #32) of a MIDI Bank Select message from 0 to 127.
&"'$"'."&.&"#
Selects whether a 'MIDI Program Change' message recorded in the track is transmitted or not.
&"'$.")(
Selects whether the sequence will send program changes whenever the sequence loops, or only on start.
&"#(#$)
D!D
"
/ ,D5I&0JP3, +01 ! D
4;++6=P@P
D)2$#CG H
&'=I69/;'=G'&
&"#$
J-.#
%=@(
#
0&1#
#+5J.#)&*" #
6I&
+$$$.656$$."(
J0;0
J.
0;0J%
0;0=+=B+%
0;0&:+#0;0=(=B(%0;0&:(#0;0==B
%0;0&:#0;0=;=B;%0;0&:;
.""&"#"'
= 0,,+01#
@ 401;&6
The TRACK NAME window will be displayed as shown.
G 0,1,#
For more information for setting the name, see the 'Setting the name' section on
Page 18.
> 4->6)I&/5*
This closes the window and goes back to the MAIN page.
."$.5/"($"'/"&"#
:# # ,MM, )MM
*J
= 0+01#,,
@ 401;&6
The TRACK NAME window will be displayed as shown.
G 0,;1,#
For more information about setting the name, see the 'Setting the name' section on
Page 18.
> 4->6)I&/5*
This closes the window and goes back to the MAIN page.