>C
C)'!)%")&
+25%#%%4:1;&6
/7
0/55;0##%0;0.%#
%),1,*%%
%%2#,1,
#%#%%
#
= 0/55;0#47564&D57;:(6
The LED of [OVERDUB] will be lit, which indicates that you can now enter events by hitting a pad.
@ %2#,1,#
%
G 9
The event of the pad will be recorded.
> 4/&6
The LED of [OVERDUB] will be turned off and you can finish the step recording.
;
401;&6 /5 5;0 / 5 & # %
I$$#'$I/(%
0 J5/# "
%%%:4R/564/5S6%
.
I5"$/#%%$I/(%
J)0;0*
%
+5
The length that a pad (MIDI keyboard) is pressed will be applied to the
event.
When you hit a pad or play a MIDI keyboard, the metronome sound will
start automatically. Refer to the metronome sound to set the length to
press a button. When you release a pad (MIDI keyboard), the length that
a key was pressed will be entered in the 'D (duration)' field.
&O
When this is selected, the duration of events recorded in 'Step Record' mode will be automatically set to a percentage of the Timing
Correct Setting. For example, if Timing Correct is set to 1/8th notes, a TC VALUE% of 50% will set the duration of each event to one-
half the length of the Timing Correct setting. In this case, the length of each recorded event will be 16th notes.
Setting a TC VALUE% of 100% will insert events equal to the Timing Correct length.
6$"$
;#%0;0
= %%#4-6)01/57*
The Insert Event window will be displayed.
@ 0,,#%#4-6);&0*
The selected event will be inserted.
#$5"'!.-4$%&
To Next Page
Loading...
