SERVICE MANUAL
3
General Power supply 100-240V AC 50/60Hz 70W (27W without options)
Dimensions 526 (W) x 170 (H) x 453 (D) mm (with LCD tilted down)
Weight 10.5kg (without options)
Display 320 x 240 dots grey-scale graphical LCD w/back light
Sound Generator Sampling rate 44.1kHz, 48kHz, 96kHz
Data format 24/16 bit linear
Sampling time 180/120 (16/24 bit) seconds mono FS=44.1kHz
(unexpanded memory) 166/110 (16/24 bit) seconds mono FS=48kHz
82/53 (16/24 bit) seconds mono FS=96kHz
90/60 (16/24 bit) seconds stereo FS=44.1kHz
83/55 (16/24 bit) seconds stereo FS=48kHz
40/26 (16/24 bit) seconds stereo FS=96kHz
Memory 16MB standard, expandable to 512MB
168-pin DIMM (PC133/PC100, CL2) slot x 2
Polyphony 64 voices
Filter 2-pole x 3 with resonance
Envelope generators 3 x Envelope generators (2 multi-stage)
LFO 2 x Multi-wave
Sequencer Maximum events 300,000 notes (equivalent)
Resolution 960 parts per 1/4-note (ppq)
Sequences 128
Tracks per sequence 128
MIDI output channels 64 (16 channels x 4 output ports)
Song mode 128 songs, 250 steps per song
Drum pads 16 (velocity and pressure sensitive)
Drum pads banks 6
Sync modes MTC, MIDI clock, SMPTE
Inputs/Outputs Rec In LINE/MIC L/R 1/4-inch stereo phone/XLR Combo jack, balanced,
1/4-inch phone, Imp. 18kΩ, 24dBu max./XLR, Imp. 6kΩ, 22dBu max.
Rec In PHONO L/R RCA phono x 2 with RIAA EQ, -24dBu max. (1kHz)
Main Out L/R 1/4-inch stereo phone/XLR Combo jack, balanced,
1/4-inch phone, Imp. 1.7kΩ, 24dBu max./XLR, Imp. 200Ω, 18dBu max.
Assignable Outs (IB-48P
required) 1/4-inch stereo phone x 8, balanced, Imp. 1.7kΩ, 18dBu max.
Headphone 1/4-inch stereo phone, 60mW (32Ω)
Digital Input (IB-4D required) RCA phono x 1, SPDIF
Digital Main Output
(IB-4D required) RCA phono x 1, SPDIF
Word Clock Input
(IB-4D required) BNC x 1 (w/75Ω terminator On/Off)
SMPTE In 1/4-inch stereo phone, balanced
SMPTE Out 1/4-inch stereo phone, balanced
Footswitch 1/4-inch phone x 2
MIDI Input 5-pin DIN x 2
MIDI Output 5-pin DIN x 4
SCSI 50-pin high-pitch SCSI connector x 1
USB Host x 1, Slave x 1 (V1.1)
Options IB-4D Digital Audio (SPDIF) I/O board
IB-4ADT Adat Interface board (2-in/8-out)
IB-48P Assignable 8-channel Output Board
Standard accessory Power Cable x 1
CD-ROM disc x 1
Drive Mounting Kit x 1
User Guide x 1
* The specifications are subject to change without the prior notice.
I. SPECIFICATIONS
To Next Page
Loading...
