Akai MPK 49

2. DISASSEMBLE THE LEFT PANEL PCB ASS’Y. (Fig2)
(A) REMOVE 4 SCREWS
(B) REMOVE 1 CABLE
(C) REMOVE PAD SENSOR
(Fig.2)
3.DISASSEMBLE THE RIGHT PANEL PCB ASS’Y. (Fig.3)
(A) REMOVE 9 KNOBS
(B) REMOVE 9 NUTS AND 9 WASHERS
(C) REMOVE 8 SLIDER CAPS FROM THE TOP PANEL
(D) REMOVE 14 SCREWS
(E) REMOVE ALL CABLES
(Fig.3)