EasyManua.ls Logo

Akai MPK Road 88

Akai MPK Road 88
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
8. Setup B/Edit: Press this button to activate the controller’s performance parameters. Press and
hold this button, along with keys on the keyboard to edit these parameters: MIDI channel 1-16
(A0-B2), pitch wheel on/off (A#0), mod wheel on/off (C#1), pedal 1-3 on/off (D#1-G#1), MIDI
port on/off (A#1), USB port (C#2).
Note: If the Setup button is held along with the other Setup button, both Setup buttons will
function simultaneously.
9. Preset Up: Press this button to cycle up through the presets.
10. Preset Down: Press this button to cycle down through the presets.
Rear Panel
1. 1/4" (6.35 mm) TRS Main Audio Outputs: Connect these audio outputs to your mixer or
power speakers.
2. 1/4" (6.35 mm) Aux Audio Outputs: Connect these outputs to external devices such as an
effects processor or a recorder.
3. 1/4" (6.35 mm) TRS Expression Inputs: Connect expression pedals here for adding
expressive changes during performances.
4. 1/4" (6.35 mm) TRS Sustain Input: This socket accepts a momentary-contact foot pedal (sold
separately). When pressed, this pedal will sustain the sound you are playing without having to
keep your fingers pressed down on the keys.
5. MIDI In: Use a five-pin MIDI cable (sold separately) to connect this jack to the MIDI Out of an
external sound module or to the MIDI Out of a synthesizer.
6. MIDI Out: Use a five-pin MIDI cable (sold separately) to connect this jack to the MIDI In of an
external sound module or to the MIDI In of a synthesizer.
7. USB Port: Use the included USB cable to connect the keyboard to a computer to trigger a
software synth or MIDI sequencer.
8. Power Switch: Use this switch to power the unit on or off.
9. Power Input: If you do not wish to power the unit through the USB connection and are using
the MIDI connector to trigger an external sound module, connect a 6V DC, 1A, center-positive
power adapter here (sold separately).
Front Panel (not shown)
1. 1/4" (6.35 mm) TRS Headphone Output: This audio output duplicates the audio signal from
the rear panel Outs 1/2.
1
2
3
4
5
6
7
8
9

Other manuals for Akai MPK Road 88

Related product manuals