HDLTEK F T ^ HT48R06A-1/HT48C06
8-Bit Cost-Effective I/O Type MCU
Features
• Operating voltage:
fSYS=4MHz: 2.2V~5.5V
fSYS=8MHz: 3.3V~5.5V
• 13 bidirectional I/O lines
• An interrupt input shared with an I/O line
• 8-bit programmable timer/event counter with over
flow interrupt and 8-stage prescaler
• On-chip crystal and RC oscillator
• Watchdog Timer
• 1024x14 program memory ROM
• 64x8 data memory RAM
• Buzzer driving pair and PFD supported
General Description
The HT48R06A-1/HT48C06 are 8-bit high perfor
mance, RISC architecture microcontroller devices spe
cifically designed for cost-effective multiple I/O control
product applications. The mask version HT48C06 is
fully pin and functionally compatible with the OTP ver
sion HT48R06A-1 device.
Block Diagram
ÏNT/PC 0
VSS
• HALT function and wake-up feature reduce power
consumption
• Up to 0.5p.s instruction cycle with 8MHz system clock
at V d d = 5 V
• Allinstructionsinoneortwomachinecycles
• 14-bit table read instruction
• Two-level subroutine nesting
• Bit manipulation instruction
• 63 powerful instructions
• Low voltage reset function
• 16-pin SSOP package
18-pin DIP/SOP package
The advantages of low power consumption, I/O flexibil
ity, tim er functions, oscillator options, HALT and
wake-up functions, watchdog timer, buzzer driver, as
well as low cost, enhance the versatility of these devices
to suit a wide range of application possibilities such as
industrial control, consumer products, subsystem con
trollers, etc.
51/73