Akai PDP4225M - Technical Specifications

Technical Specifications
PDP42M
9. Agency Approvals
Safety : UL, FCC, FDA
Emissions : UL, FCC, FDA
10. Reliability
MTBF : 20,000 hours(Use moving picture signal at 25°C ambient)
11. Accessories
User manual x1, Remote control x1, Stand x 1, Battery x 2, AC Cable x 1
12. Remote Control
1 Standby(o): Press this button to turn off to
standby and turn on from standby.
2 Mute(K): Press this button to quiet the sound
system. Press again to reactivate the
sound system.
3 P. Still: Press this button to hold on the
screen. Press again to normal.
4 P. Size: When the input source is YPbPr 1,
YPbPr 2, VGA or HDMI, press this button,
the picture will change according to Fill All,
Force 4:3, Letter Box, Wide or Anamorphic.
When the input source is AV or S-Video, press
this button, the picture will change according to
Fill All, 4:3, Letter Box, Wide or Anamorphic.
5 S. Sele: Press this button to select the sound
output from Main Window or Sub Window.
6 P. Mode : Press the button to select different
picture effect.
7 Time: Press this button to pop up the "Clock
Set” menu.
8 Sleep: Press this button to select the sleep
time.
9 Display: Press the button to display the
source information.
10 Auto: The Display automatically adjusts the
phase, vertical / horizontal position when
pressing this button in VGA mode.
11 Layout: Press this button to pop up Layout
menu.
12 C/C: Press this button to enter the Closed
Caption Function. (Only for AV or S-Video)
(Continued on next page)
7/73