Akai PDP4225M - Page 8

T e c h n i c a l S p e c if ic a t i o n s
PDP4225M
6.11 Color temperature
Contrast at center (50); Brightness center (50);
Color temperature set at Natural
x=0.285±0.02
y=0.290±0.02
6.12 Cell Defect Specifications
Subject to Panel supplier specification as appends.
7. F ro n t P a n e l C o n tro l B u tto n
7.1 SEL. Up / Down Button
VOL. Left/Right Button
MENU Button
SOURCE Button
Select the Up/Down item in OSD menu.
Push the key to increase the volume left or right.
When selecting the adjusting item in OSD menu
increase or decrease the data-bar.
Display or Exit the OSD menu.
Press this button and use up/down button to sellect
the signal sources. AV, S-Video, YPbPr 1,YPbPr 2,
VGA or HDMI.
7.2 STANDBY Button Switch on main power, or switch off to enter power
Saving modes.
7.3 Main Power Switch Turn on or off the unit.
8. O S D F u n c tio n
8.1 Picture : Brightness; Contrast; Saturation; Peaking; Phase; Sharpness; Frequency;
Picture Mode (Normal, Bright, Cinema, User);
Color Temp (Warm, Normal, Cool); etc.
8.2 Window : Image Size (Fill All, Force 4:3, Letter Box, Wide, Anamorphic, etc);
H Position; V Position; H Resolution; Freeze Window (Off, On)
8.3 Audio : Balance; Audio Mode (BBE, Cinema, Music, News, User)
(Internal, External); a Vc (Off, On)
Equalizer (120Hz, 500Hz, 1.2kHz, 3kHz, 12kHz)
8.4 Options : Osd Timeout (5 Sec, 15 Sec, 60 Sec); Menu Background (Opaque,
Translucent); Language(English, French, Spanish); Default Setting;
Close Caption Mode; Close Caption; Content Blocking; Timer
8.5 Layout : Full Screen; PIP; Split Screen
6/73