FHP A3 PANEL DATASHEET
Storage of PDP Module
1. When storing the PDP module, select an environmentally controlled place. Also, avoid any environment
that exceeds the module's temperature or humidity specifications. Sometimes the PDP module does not
discharge easily after long storage. In this case, about 2 hours full white display (aging) is recommended.
Please execute aging one time at half a year.
2. Avoid exposure to rapid temperature changes, which cause moisture to condense inside the product. Store
products in locations where temperature changes are slight.
3. Avoid storing packages where tliey are exposed to corrosive gases or high levels of dust.
4. When transferring the PDP module by a forklift or crane, the only eligible person to operate them can do
this work.
Repair and Maintenance
The repair and maintenance of this product cannot be held at user site locally as this product is manufactured
with various kiixls of test and adjustment. This issue has to be determined separately from this specification.
Other
1. €1151011101-5 considering the use of FUJITSU HITACHI PLASMA DISPLAY products in other special
environmental conditions should consult with FUJITSU HITACHI PLASMA DISPLAY sales representatives.
2. The contents of this document may not be reproduced or copied without tlie permission of FUJITSU
HITACHI PLASMA DISPLAY Ltd.
61/73
To Next Page
Loading...
