Akai PR-A04 - Page 18

I. TECHNICAL DATA
RATED
POWER
OUTPUT
48
watts
per
channel.
minimum
RMS.
at
8
ohms
from
20
to
20,000
Hz
with
no
more
than
0.008%
total
harmonic
distortion.
TOTAL HARMONIC DISTORTION 0.008% at rated power output
INTERMODULATION DISTORTION 0.008% at rated power output
SIGNAL TO NOISE RATIO (IHF “‘A”’) 115 dB
RESIDUAL NOISE (IHF ‘‘A’’) | Less than 0.05 mV at 8 ohms
POWER BANDWIDTH (IHF) | 6 Hz to 60 kHz at 8 ohms
(Total Harmonic Distortion 0.05%)
DUMPING FACTOR (IHF) More than 100 (1 kHz, 8 ohms)
FREQUENCY RESPONSE DC to 100 kHz +0 dB, —-0.5 dB
INPUT SENSITIVITY/IMPEDANCE 1 V/47 kohms
OUTPUT
SPEAKERS A, B (4 to 16 ohms)/A+B (8 to 16 ohms)
HEADPHONE 8 to 16 ohms
SUBSONIC FILTER 12 dB/oct. at 5 Hz
MISCELLANEOUS
SEMICONDUCTORS Transistors 27, Diodes 47, FETs 2. ICs 7
POWER REQUIREMENTS 120 V, 60 Hz for U.S.A. and Canada Models
220 V, 50 Hz for Europe except UK Models
240 V, 50 Hz for UK and Australia Models
110/120/220/240V, 50/60 Hz internally Switchable for
other countries Models
POWER CONSUMPTION 300 W
DIMENSIONS (W x H x D) 440 x 78 x 373 mm (17.3 x 3.1 x 14.7 inches)
WEIGHT 6.7 kg (14.7 lbs)
* For improvement purposes, specifications and design are subject to change without notice.