Akai PR-A04

I. TECHNICAL DATA
INPUT SENSITIVITY/IMPEDANCE/
SIGNAL TO NOISE RATIO (IHF “A”)
PHONO 1/2 (MM)
PHONO 1 (MC)
3 mV/47 kohms/82 dB
0.08 mV/10 ohms/75 dB
TUNER 150 mV/47 kohms/102 dB
AUX 150 mV/47 kohms/102 dB
TAPE PLAY 1 PIN: 150 mV/47 kohms/102 dB
DIN: 150 mV/100 kohms/80 dB
TAPE PLAY 2 PIN: 150 mV/47 kohms/102 dB
OUTPUT LEVEL/IMPEDANCE
TAPE REC 1 PIN: 150 mV/600 ohms
DIN: 30 mV/30 kohms
TAPE REC 2 PIN: 150 mV/600 ohms
OUTPUT 1 V/600 ohms
RATED LOAD IMPEDANCE
47 kohms
PHONO MAX. INPUT LEVEL (1 kHz)
PHONO 1/2 (MM)
PHONO 1 (MC)
400 mV
10 mV
FREQUENCY RESPONSE
TUNER/AUX/TAPE PLAY 1, 2
PHONO 1/2 (MM) (RIAA curve deviation)
PHONO 1 (MC) (RIAA curve deviation)
TOTAL HARMONIC DISTORTION
(20 Hz to 20 kHz)
TUNER/AUX/TAPE PLAY 1, 2
PHONO 1/2 (MM)
PHONO 1 (MC)
5 Hz to 100 kHz + 0.5 dB
30 Hz to 15 kHz + 0.2 dB
30 Hz to 15 kHz + 0.2 dB
0.005% at output 10 V
0.005% at output 10 V
0.005% at output 10 V
(Volume control set at Max. position)
TONE CONTROL
BASS
TREBLE
SUBSONIC FILTER
HIGH FILTER
CHANNEL SEPARATION (AUX)
+8 dB at 100 Hz
+8 dB at 10 kHz
12 dB/oct. at 18 Hz
12 dB/oct. at 10 kHz
70 dB (Shorted Circuit)
MISCELLANEOUS
SEMICONDUCTORS
je
Transistors: 16, Diodes: 15, FETs: 2, ICs: 6
POWER REQUIREMENTS
120 V, 60 Hz for U.S.A. and Canada Models
220 V, 50 Hz for Europe except UK Models
240 V, 50 Hz for UK and Australia Models
110/120/220/240 V, 50/60 Hz internally Switchable
for other countries Models
POWER CONSUMPTION
DIMENSIONS (W x H x D)
WEIGHT
15 W
440 x 78 x 313 mm (17.3 x 3.1 x 12.3 inches)
6.1 kg (13.4 Ibs)
* For improvement purposes, specifications and design are subject to change without notice.