EN-ENGLISH
AC POWER
IMPORTANT NOTES
. Make sure the power supply is proper and never handle the power cord or its plug with wet hands when
plugging into, or unplugging from an outlet.
. Ensure that the main power switch is in the “OFF” position before connecting the AC power cord to the
power supply to avoid damage to the unit.
. A damaged power cord can easily cause an electric shock or fire hazard; Never use a power cord after it
has been damaged.
BATTERY INSTALLATION
1) Open the battery case.
2) Insert two batteries without the polarity reversed.
3) Close the battery case.
4) Keep within 5-meter range, 30-degree angle while aiming at the unit.
Precautionary note:
Remove the battery when the unit is not being used for a long period of time.
To Next Page
Loading...
