Need help?Do you have a question about the Akaso Brave 4 and is the answer not in the manual?
General| Time lapse mode | Yes |
|---|---|
| Maximum frame rate | 24 fps |
| Maximum video resolution | 3840 x 2160 pixels |
| Sensor type | CMOS |
| Total megapixels | 20 MP |
| Optical sensor size | - \ |
| Digital zoom | 5 x |
| Field of view (FOV) angle | 170 ° |
| Flip-out screen | No |
| Product color | Black |
| Storage media | Internal memory + Memory card |
| Battery capacity | 1050 mAh |
| Battery life (max) | 1 h |
| Battery technology | Lithium |
| Number of batteries supported | 2 |
Weight and Dimensions| Weight | 550 g |
|---|
Use brand name memory cards U3, up to 64GB (FAT32). Format before use for best condition.
Press and hold the Power button for 3 seconds to turn the camera on or off. An indicator light confirms the status.
Configure video recording resolution from 4K30fps to 720p30fps. Higher resolution means larger files.
Enable or disable Electronic Image Stabilization (EIS2.0) for smoother videos during movement.
Set video recording intervals (2, 3, 5 min) to overwrite older footage automatically.
Set time lapse intervals and adjust video quality (High/Middle/Low).
Select photo resolution and configure burst shot rate (3, 5, 10 photos/sec).
Control exposure levels and enable Wide Dynamic Range (WDR) for better detail in challenging light.
Adjust image sharpness and ISO sensitivity to control image detail and light sensitivity.
Format the memory card for better compatibility and to keep it in good condition.
Tips to extend battery life, such as turning off Wireless Connections and using Screen Saver.
To Next Page
