Door Control Unit User Manual
Updated until firmware 404p - 12 -
- Max current < 100mA
- 2 pins: 12V - signal (active low)
The Cables Should not be extended further than the following;
3 meters for the IR Exit button, Card Readers and External Lock Override
3 meters for the EM door lock
3 meters for the cable between the DCU and the Lock Converter Box
5 meters for the Finger Print readers and the HD Digital Cameras
Mounting the DCU on a wall
With the AKCP single unit wall mount rack the DCU can be mounted on a wall near
the door for convenience.
To Next Page
Loading...