EasyManua.ls Logo

AKDY 668 Series - User Manual

Default Icon
19 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
30" AND 36" WALL-MOUNT RANGE HOOD
Universal Installation Instructions and Use & Care Guide
For questions about features, operation/performance parts, accessories or service, call:
1-626-453-0550
or visit our website at...
www.akdytrading.net
IMPORTANT: READ AND SAVE THESE INSTRUCTIONS.
FOR RESIDENTIAL USE ONLY.
Model:
668 Series
63175
63190

Table of Contents

Questions and Answers

  • J
    Jennifer ParkerAug 11, 2025
    What to do if the AKDY 668 and/or the lamp does not work?
    • R
      Robert BowenAug 11, 2025
      If your AKDY Range hood or the lamp isn't working, it could be due to a loose terminal or connector. To resolve this, open the control box by removing the 6 screws, and then disconnect the power supply from the hood. Check that the connector coming from the motor is securely connected to the connector mounted on the plastic, ensuring the locking system is properly engaged. If the connectors are not well connected: - Hold and press the main connectors attached in the white plastic. - Push inwards the motor/lamp connectors until the locking system on connectors is well attached. Finally, reconnect the hood to the power supply and verify.
  • A
    Anthony SmithAug 16, 2025
    What to do if the AKDY 668 fan does not work?
    • L
      Lynn TranAug 16, 2025
      If the AKDY Range hood fan is not working, there might be an issue with the electronic control due to over voltage. Check if the LCD lights up and icons are in place when pressing any key. If not, consider replacing the control and user interface. Also, the motor connector might have become loose during cleaning, causing a false contact. To resolve this, open the control box, remove the power supply, and ensure the motor connector is securely connected to the plastic connector, making sure the locking system is engaged. Reconnect the power supply and test.
  • J
    James WoodsAug 22, 2025
    How to fix false contact in AKDY 668 Range hood connectors?
    • P
      Patrick GonzalezAug 22, 2025
      If you're experiencing false contacts in the connectors of your AKDY Range hood, it's possible the motor connector became loose during cleaning. To fix this, open the control box by removing the screws, then disconnect the power supply from the hood. Check that the connector from the motor is securely attached to the connector on the plastic, ensuring the locking system is properly engaged. If the connectors are loose: - Hold and press the main connectors attached to the white plastic. - Push the motor/lamp connectors inward until the locking system is firmly attached. Finally, reconnect the hood to the power supply and verify.
  • J
    Joseph KirbyAug 29, 2025
    Why is my AKDY 668 blower so noisy?
    • T
      Terry ReyesAug 29, 2025
      If your AKDY Range hood blower is excessively noisy, it might be due to dirty filters. Check the grease and/or charcoal filters to see if they are clean. If the charcoal filter is dirty, replace it. If it's a grease filter, wash it and then verify if the noise has reduced.
  • S
    Steven BarkerSep 4, 2025
    How to fix AKDY Range hood lamp that does not turn on?
    • R
      Robert LeeSep 4, 2025
      If the lamp on your AKDY Range hood isn't turning on, there could be a few reasons. First, the electronic control might not be working due to over voltage. Check if the LCD lights up and icons are displayed when you press any key. If not, you may need to replace the control and user interface. Another possibility is a non-functional lamp. Remove the lamp and check if the filament is burned or not correctly placed. Replace the lamp if necessary. Also, check the motor connector. If it has been loose during cleaning, open the control box, remove the power supply, and ensure the motor connector is securely connected, verifying the locking system. Reconnect the power and check.

AKDY 668 Series Specifications

General IconGeneral
BrandAKDY
Model668 Series
CategoryRange hood
LanguageEnglish