Åkerströms Sesam 500 User Manual

ÅKERSTRÖMS BJÖRBO AB, S-78045 BJÖRBO, Sweden Phone +46 241 25000 Fax +46 241 23290
Fax service dept +46 241 25090 Vat No SE556153982501 Säte/Registered office BJÖRBO
Basic requirements for the owners
Warning
Do not make changes on the devices.
Violation will invalidate interference emission certification (FCC, RSS, CE), and the
manufacturer’s warranty.
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
Note
This equipment has been tested and found to comply with the limits for a Class B digital
device,
pursant
to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures.
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected
• Consult the dealer

Åkerströms Sesam 500 Specifications

General

Brand	Åkerströms
Model	Sesam 500
Category	Door Opening System
Language	English

Summary

Basic Requirements and Warnings

Warning

Important safety and compliance information regarding device modifications and FCC rules.

Note on Interference

Details testing results, FCC compliance, and measures to correct radio interference.

Sesam 500 Product Overview

Transmitter Models

Introduces Sesam 501, 503, 512, and 599 transmitters with their key features and capabilities.

Receiver Systems

Describes the receiver systems, including single or triple output relays for the Sesam 500.

Technical Description and Specifications

System Characteristics

Outlines general technical specifications like frequency band, modulation, output power, and operating temperature.

Individual Model Specifications

Details specifications for Sesam 501, 503, 512, 599 transmitters and R1-R5 receivers.

Operation and Coding

Transmitter Operation

Explains the function of pushbuttons for Sesam 501, 503, 512, and 599 transmitters.

Receiver Connection and Coding

Details receiver voltage input, aerial assembly, and the process of coding transmitters and receivers.

Application and Security

Range of Application

Describes the Sesam 500 system's use for door opening and simple on/off applications.

Security Limitations

Clarifies that Sesam 500 is not a security system and its limitations for high-security or personnel safety applications.