To Next PageTo Next Page
Need help?Do you have a question about the akkuteam VAS 5903 and is the answer not in the manual?
Explains the meaning of WARNING! and CAUTION! messages for user awareness.
Covers NOTE!, Important! tips, and general safety remarks for operation.
Defines proper product use and the recommended operating environment.
Details dangers from mains and charging current, with necessary precautions.
Covers hazards from battery acid, gases, and vapors during charging.
General information and tips for safe battery care and maintenance.
Precautions for user and others in the vicinity of the charger and battery.
Specific safety steps and considerations for regular charger use.
Electromagnetic compatibility and field measures for safe operation.
Procedures for upkeep, repairs, and details on product coverage.
Mandated intervals and procedures for safety inspections.
Proper disposal procedures for electronic equipment according to directives.
Explanation of compliance marks and copyright protection for the manual.
Fundamental safety rules for the operation of the battery charger.
Critical warnings about the hazards of explosive gases generated by batteries.
User safety measures and protective advice when working near batteries.
Essential steps and checks before commencing the battery charging process.
Recommended placement and positioning of the charger for safety and efficiency.
Safe hookup procedures for charging terminals to prevent sparks and damage.
Step-by-step guide for connecting the charger to a battery installed in a vehicle.
Steps for connecting the charger to a battery removed from a vehicle.
Electrical grounding requirements and safe connection of the power cord.
Safety guidelines for the use of the appliance by children or supervised persons.
General safety points and warnings applicable to the charger.
Specifies the types of batteries that the charger is designed to charge.
Explanation of the various symbols and icons used within the manual.
Description of the main control panel, including buttons and display.
Details of physical connectors, terminals, and the USB port.
Step-by-step guide for securing the charger to a floor.
Step-by-step guide for securing the charger to a wall.
Instructions for attaching a special edge guard to the charger.
Lists and briefly describes all available operating modes.
In-depth explanation of the standard charging mode.
In-depth explanation of the refresh charging mode.
How to use the charger as a power source for consumers.
How to test a battery's ability to accept charge.
Step-by-step guide to starting the battery charging cycle.
How to track the charging status and progress.
Displaying real-time charging data such as current and voltage.
Accessing charging data once the charging session has stopped.
Special procedure for manually starting charge on low-voltage batteries.
What happens when charging is nearly complete and conservation mode.
How to pause and restart an ongoing charging process.
Steps to safely end a charging session and disconnect the charger.
How to enable the charger's external power supply (EPS) mode.
Manual steps required to activate the external power supply mode.
Operation when the charger increases output to maintain battery voltage.
Steps to safely deactivate the external power supply mode.
Explains the current input test and how to start it.
Manual start procedure for the current input test on low-voltage batteries.
Displaying and interpreting parameters during the current input test.
What a successful test indicates and subsequent actions.
Shows detailed charging parameters after the test completion.
What a failed test indicates and identification of a faulty battery.
Entry into the setup menu and overview of available options.
Customizing charger settings for current and voltage.
Adjusting the maximum charging current limit for the device.
Adjusting the primary charging voltage parameter.
Adjusting the voltage for conservation (trickle) charging.
Setting safety timers and parameters for external power supply.
Setting refresh charging voltage and the duration of the process.
Storing and recalling frequently used operating modes.
Adjusting parameters for the charging cable length and cross-section.
Restoring the device settings to their original factory configuration.
Configuring a delay before the charging process begins.
Viewing firmware and hardware version details of the device.
Checking the device's operating time and charging history.
Issues with charging terminals connection and battery detection.
Causes for overheating and activation of the safety cut-out.
Problems related to the cooling fan and internal fuses.
Identifying internal charger malfunctions and display error messages.
Reasons why the charging process may not initiate correctly.
Detailed electrical parameters including voltage, current, and power ratings.
Recommended temperature ranges and environmental limits for operation and storage.
Information on safety marks, IP rating, weight, and physical dimensions.
General| Brand | akkuteam |
|---|---|
| Model | VAS 5903 |
| Category | Battery Charger |
| Language | English |
