Akman SR6 - File and Folder Naming Conventions; Naming Rules for Files; File Folder Naming; Warning Against MAC File Copying

HOW TO NAME A FILE FOLDER AND TO NAME THE AUDIO/VIDEO
FILE:
USE simple letters only and DO NOT use any space in the file name. The SR6
will not play if a file has a space in its name.
Example:
Big Bird.ts. This file will not play because of the space between Big and Bird. To
play, change it to Big_Bird.ts (no space).
Bad dog.ts. This file will not play (space between Bad and Dog).
Bad_dog.ts. This file will play (no space in it’s name).
The file folder name does not matter since the SR6 will recognize it as a file folder.
However it is a good idea to name it using 8 characters or less. Copy the
audio/video files that you want to play using the SR6 digital input into this folder.
You do not have to re-name the audio/video files. DO NOT USE MAC.
How to play SLIDESHOW:
When playing a group of Jpeg pictures, you can adjust the slide show effect and
also the timing as follows:
The slide show has 2 settings:
Slide show effect and Slide show timing.
Slide show effect:
To see the slide show effect, do the following:
WHILE PLAYING a JPEG file:
press RESUME key (under the VOL- key on the remote control) to see the
different slideshow effect. Select the desired slide effect and enter it in the
playlist.txt. There are a total of 13 slide show effects.
Here is an example of playlist.txt:
SLIDESHOW=13
SLIDETIME=10
010000=birds.vob
SLIDESHOW=xx where xx is the selected slide show effect.
Slide show selection is from 1 to 13.
Note for selection 13:
Selection 13 is for RANDOM effect.
If there is NO SLIDESHOW=XX statement in playlist.txt, the SR6 will use
slideshow effect selection NONE.
Slide show timing:
To enable the time add this statement in playlist.txt:
SLIDETIME=tt where tt is time in seconds.
“tt” timing is from 2 seconds to 59 seconds.
Example: SLIDETIME=5 means slide show timing is 5 seconds.
TIME of the slideshow is the length of time the Jpeg file is shown on screen. Time
is in second.