EasyManua.ls Logo

Aktobis WDH-416S User Manual

Aktobis WDH-416S
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: info@aktobis.de
Dehumidifier WDH-416S
Dear Customer,
You have chosen a high quality product. To ensure that you get a lot of enjoyment from this product, here are a few
more tips:
After transport:
Since the unit uses refrigerant, improper transport can sometimes occur despite careful instructions on the carton.
For this reason, we ask you to leave it standing upright for at least
4 hours before using the unit for the first time, so that the refrigerant can settle properly in the unit.
In case of any problems:
We hope the device meets your expectations! If, despite the greatest possible care, there should ever be cause for
complaint, we ask you to contact us briefly, as we are very concerned about your satisfaction and would like to
clear up any misunderstanding.
Question and Answer IconNeed help?

Do you have a question about the Aktobis WDH-416S and is the answer not in the manual?

Aktobis WDH-416S Specifications

General IconGeneral
BrandAktobis
ModelWDH-416S
CategoryDehumidifier
LanguageEnglish

Summary

Operation and Safety Guidelines

Important Safety Instructions

Follow instructions, supervise children, avoid electricity contact, proper ventilation.

Refrigerant Safety Information

R290 Refrigerant Safety

Unit uses R290, a flammable refrigerant; follow all safety instructions strictly.

User Guide and Operation

Commissioning the Dehumidifier

Steps for initial setup, including power, tank, humidity setting, and air circulation.

Operating Instructions and Cleaning

Maintenance and Specifications

Technical Data

Key specifications including model, voltage, capacity, refrigerant, and dimensions.

Troubleshooting Guide

Insufficient Dehumidification

Reasons for low water accumulation and factors affecting performance.

Water Leaks Diagnosis

Troubleshooting 'leaks' which are usually due to drainage issues or ice blockage.

Related product manuals