FITTING FROM THE BASE AND UPWARDS
• Place the base boards plates on the base frame connect them with the four black legs.
Secure with the fixing paddles.
• The upholstered sides of the frame are connected loosely with the head- and footend
parts by means of angle brackets. Begin with the inner screws.
• When the base boards and upholstered sides have been placed symmetrically, the
screws are fastened tightly one by one.
• Now fasten 2 more angle brackets per side to the side parts and the base boards.
• When installing the rest of the bed: see instructions for HARDSIDE.
To Previous Page
