AK-CA-16 - user manual
/ak-ca-16
www.akyga.com
Short description of the product
The product is compatible with the applicable national and European requirements.
What is in the box?
- AK-CA-16 Adapter
Symbols explanation:
There is a risk of losing health or life (e.g. by electic shock).
There is a particular danger connected with service.
Important tips and information.
Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket
placed on the product means that the marked product can not be disposed of with other
household waste. After use, the product must be return to collection point for used electical and
electronic equipment or to the seller. Appropriate segregation of rubbish for subsequent
processing, recovery or descrution contributes to avoiding negative effects on the environment
and health, and also allows the recovery of raw materials from which the product is made.
p. 1
The Akyga AK-CA-16 adapter is designed connect a power supply to HDD/SSD or CD/DVD drives. It
allows to simultaneously connect two devices equipped with SATA connectors to the power supply via
the Molex connector of ATX power supply.
The product is designed for a supply voltage of 5 V/12 V and a current of max. 2 A on the 5 V line and 2.5
A on the 12 V line. The current consumption of the supplied devices must not exceed the rated current
indicated on the power supply unit.
EC
BOX
Ecological Solutions
GREEN
Molex / SATA adapter
The device is intended only for domestic use, indoors.
Safety Precautions
The adapter is for trained and qualified persons.
An electrostatic discharge occurs when two object touch each other, for example, an electric
charge that occurs when user touch metal door handle after walking on a carpet . Discharging
electrostatic charges from fingers or other electrostatic conductors can damage electronic
components. To avoid damaging the computer, abstain from touching electrical outlets, wires and
electonic circuits. The user’s contact with electronic components should be kept to a minimum.
Connecting components whose current demand is greater than the adapter's power may lead to
damage (burning) of the adapter.
The adapter should be operated indoors without exposure to water or direct sunlight.
To Next Page
Need help?
General
