Need help?Do you have a question about the AL-KO 112 478 and is the answer not in the manual?
General| Product Type | Submersible Pump |
|---|---|
| Maximum Immersion Depth | 7 m |
| Maximum Grain Size | 5 mm |
| Power | 250 W |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Protection Class | IP X8 |
Identifies numbered parts of the Hydrocontrol unit and its connections.
Lists key technical parameters like voltage, IP rating, flow rate, and pressure.
Specifies the intended uses, liquids, and limitations of the manometric switch.
Essential safety rules and warnings for users and the device.
Requirements for electrical system connection, grounding, and protection.
Lists disallowed uses and what is included in the product package.
Explains automatic operation, dry run protection, and flow control.
Step-by-step instructions for filling, connecting, and starting the system.
Covers switching off, manual restart, and status LED explanations.
Guidance on routine care, frost protection, and responsible disposal.
Identifies LED states, their causes, and recommended solutions for common failures.
Outlines the requirements for warranty validity and coverage.
Lists conditions that void the warranty or are not covered.
To Next Page