Need help?Do you have a question about the AL-KO BC 500 B and is the answer not in the manual?
Describes essential safety features and the importance of maintaining them for injury prevention.
Outlines requirements and recommendations for the person operating the appliance, including age and health.
Details the necessary clothing and protective gear required for safe operation.
Covers safety measures to be taken in the environment where the appliance is used.
Specifies conditions and checks for the safe operation and maintenance of the appliance itself.
Provides critical safety guidelines for storing, mixing, and handling fuel and oil mixtures.
Instructions on correctly preparing and filling the fuel tank with the petrol/oil mixture.
Detailed procedure for starting and stopping the engine for specific brushcutter models.
Procedure for starting and stopping the engine for different brushcutter models.
Describes essential safety features and the importance of maintaining them for injury prevention.
Outlines requirements and recommendations for the person operating the appliance, including age and health.
Details the necessary clothing and protective gear required for safe operation.
Covers safety measures to be taken in the environment where the appliance is used.
Specifies conditions and checks for the safe operation and maintenance of the appliance itself.
Provides critical safety guidelines for storing, mixing, and handling fuel and oil mixtures.
Instructions on correctly preparing and filling the fuel tank with the petrol/oil mixture.
Detailed procedure for starting and stopping the engine for specific brushcutter models.
Procedure for starting and stopping the engine for different brushcutter models.
General| Power source | Gasoline |
|---|---|
| Type | Brush cutter |
| Cutting width | 415 mm |
| Line diameter | 2.5 mm |
| Rotational speed | 9000 RPM |
| Number of strokes | 2 |
| Sound power level | 111.8 dB |
| Fuel tank capacity | 0.9 L |
| Engine displacement | 50.8 cm³ |
| Sound pressure level | 99.3 dB |
| Cutting diameter (max) | 255 mm |
| Sound power level uncertainty | 3 dB |
Weight and Dimensions| Weight | 7800 g |
|---|
To Next Page
