Need help?Do you have a question about the AL-KO SPE 400 and is the answer not in the manual?
General| Power | 400 W |
|---|---|
| Max Suction Height | 8 m |
| Cable Length | 10 m |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Maximum Water Temperature | 35 °C |
| Protection Class | IP X4 |
| Pump Outlet | G 1 (33.3 mm) |
Essential safety guidelines for operating the submersible pump to prevent accidents and ensure proper function.
Details electrical connection requirements: voltage, current, fuse protection, and cable specifications.
Outlines the intended applications for the submersible pump in domestic and garden environments.
Lists and identifies the main parts of the submersible pump, referencing Fig. A.
Explains how the pump draws in and expels liquid, and its thermal protection feature.
Instructions for manually operating the float switch to pump out residual liquid.
Guidance on adjusting the float switch cable to set cut-in and cut-off levels.
Simple procedure for turning off the pump by unplugging it.
Procedures for cleaning the pump and protecting it from freezing temperatures.
To Next Page
