Do you have a question about the AL-KO TE 1000 TA and is the answer not in the manual?
Instructions for attaching the guard to the machine's lower casing.
Procedure for fitting the trimming guide wheel to the front of the guard.
Steps for attaching the central handgrip using provided parts.
Assemble the cutting head as described in the 'REPLACING THE TRIMMING DEVICE' chapter.
Assemble the shoulder harness clasp as shown in the figure.
Instructions for attaching the guard to the machine's lower casing.
Procedure for fitting the trimming guide wheel to the front of the guard.
Steps for attaching the central handgrip using provided parts.
Assemble the cutting head as described in the 'REPLACING THE TRIMMING DEVICE' chapter.
Assemble the shoulder harness clasp as shown in the figure.