ALADDIN LIGHT LIFT ALL300 - User Manual

ALL300
INSTALLATION
INSTRUCTIONS
WARNING: Disconnect power source before servicing to avoid electrical shock
CAUTION: To Reduce the Risk of Electric Shock or Injury, Use Indoors Only.
Light and motor circuits are rated at 110V
Not suitable for air handling spaces
Pour usage seulement dans un endroit
Avec acces au dessus du plafonds
Model Number: ALL300 (300lb. rated working load, 1/8” steel galvanized lay cable, 1.5amp, 50/60Hz)
__ Greeneld _(if checked)
Light lift is equipped with a 35’ cable unless checked below:
______65’
______90’
______120’
Light lift is equipped with a 1,650 watt (15 amps)
lighting capacity unless checked below:
______2200 watts (20 amps)
________________________ Electric Hoist
91F5
Patent #5105349

Summary

ALL300 Installation Instructions

Installation - Mechanical Setup

Initial Mounting and Conduit Assembly

Steps 1-4: Mounting location, box removal, hole cutting, conduit assembly.

Installation - Unit Assembly & Securing

Conduit Connector & Weight Attachment

Installation - Positioning & Leveling

Unit Placement & Box Elevation

Installation - Cable & Fastening

Cable Plumb & Floor Joist Fastening

Installation - Electrical Wiring

Motor & Light Wiring Connections

Steps 11-12: Wiring motor/light switches, connecting circuits.

Installation - System Testing & Controller

Cable Handling, Controller & Shut-off Test

Installation - Chandelier Attachment

Weight Setting & Chain Attachment

Installation - Final Assembly & Wiring

Canopy Fit & Chandelier Wiring

Installation - Final Checks & Operation

Securing Fittings & Final Testing

Troubleshooting Guide

Unit Not Operating

Steps to diagnose and resolve issues when the unit is not functioning.

Chandelier Illumination Failure

Steps to troubleshoot when the chandelier illumination fails.

ALADDIN LIGHT LIFT ALL300 Specifications