Play back video locally to a TV using an ADC-CSVR2000P/2008P/
2016P
The ADC-CSVR2000P/2008P/2016P can play back live and recorded video locally to one or two monitors using its
HDMI outputs. The ADC-CSVR2000P/2008P/2016P can output the video of all of the cameras associated to it.
To connect the ADC-CSVR2000P/2008P/2016P to a monitor:
Connect external monitors/TVs
Attach up to two monitors/TVs to the device using the HDMI ports. The outputs are mirrored, so the same interface is
shown on two screens.
Connect a keyboard and mouse to navigate the user interface
Use the two rear USB 2.0 ports to connect a keyboard and mouse. The front USB 3.0 port is recommended to be
reserved for connecting external storage devices.
User interface
Live video
To arrange the cameras on the screen:
Click and drag the views to the desired location.
To see additional camera details:
1. Right-click the camera.
2. Click OSD (On-screen display). The additional details include the following:
◦ Camera model
◦ Resolution
◦ Encoding
◦ Bitrate in Kbps
◦ Frame rate
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Commercial_Stream_Video_Recorder_(…
Updated: Thu, 14 Apr 2022 20:26:38 GMT
1
To Next Page
Need help?
General
