Alarm.Com ADC-CSVR2016P User Manual (English)

To Next Page

Play back video locally to a TV using an ADC-CSVR2000P/2008P/

2016P

The ADC-CSVR2000P/2008P/2016P can play back live and recorded video locally to one or two monitors using its

HDMI outputs. The ADC-CSVR2000P/2008P/2016P can output the video of all of the cameras associated to it.

To connect the ADC-CSVR2000P/2008P/2016P to a monitor:

Connect external monitors/TVs

Attach up to two monitors/TVs to the device using the HDMI ports. The outputs are mirrored, so the same interface is

shown on two screens.

Note: When connecting the CSVR to multiple displays, it is recommended to use the same resolution on both attached

displays.

Connect a keyboard and mouse to navigate the user interface

Use the two rear USB 2.0 ports to connect a keyboard and mouse. The front USB 3.0 port is recommended to be

reserved for connecting external storage devices.

User interface

Live video

To arrange the cameras on the screen:

Click and drag the views to the desired location.

To see additional camera details:

1. Right-click the camera.

2. Click OSD (On-screen display). The additional details include the following:

◦ Camera model

◦ Resolution

◦ Encoding

https://answers.alarm.com/Customer/Website_and_App/Video/Recording_Video/Play_back_video_locally_to_a_TV_using_an…

Updated: Wed, 12 Apr 2023 10:40:19 GMT

Other manuals for Alarm.Com ADC-CSVR2016P

Need help?

Do you have a question about the Alarm.Com ADC-CSVR2016P and is the answer not in the manual?

General