Alarm Controls Corporation RT-1 User Manual

MODEL RT-1
WIRELESS TRANSMITTER
AND RECEIVER
Alarm Controls Corporation
19 Brandywine Drive
Deer Park, New York 11729
(800) 645-5538
www.alarmcontrols.com
RECEIVER OPERATES ON 12 OR 24 VOLTS AC OR DC. CURRENT DRAW IS 50 mA MAX.
S.P.D.T. RELAY WITH 1 AMPERE @ 30 VDC OR 120 VAC CONTACTS
RECEIVER HAS A BUILT-IN FIVE SECOND DELAY ON RELEASE
WORKING FREQUENCY IS 433.92 MHz
ROLLING CODE WITH ONE BILLION COMBINATIONS
RECEIVER OPERATING TEMPERATURE RANGE IS –20°C TO +60°C
RECEIVER WILL ACCEPT UP TO 30 TRANSMITTERS
RECEIVER HAS A SMALL SIZE (2.5”L x 1.25”W x 0.75”D)
RECIEVER IS IN AN ATTRACTIVE OFF-WHITE CASE
RECEIVER SCREW TERMINALS ARE HIDDEN BY COVER
BI-COLOR LED ON RECEIVER INDICATES RELAY STATUS
TRANSMITTER TO RECEIVER RANGE IS A MAXIMUM OF 300 FEET
TWO TRANSMITTERS ARE SUPPLIED. ONE HAS A KEY CHAIN
A UNIQUE TRANSMITTER HOLDER CAN BE MOUNTED UNDER A DESK OR ON THE WALL
ADDITIONAL TRANSMITTERS ARE AVAILABLE (PART NUMBER RT-1T).

Alarm Controls Corporation RT-1 Specifications

General

Brand	Alarm Controls Corporation
Model	RT-1
Category	Receiver
Language	English

Summary

Model RT-1 Wireless Transmitter and Receiver Overview

Model RT-1 Receiver/Transmitter User Guide

Pairing Additional Transmitters

Instructions for pairing additional transmitters with the receiver using the learning button.

Removing All Learned Transmitters

Procedure to remove all previously learned transmitters from the receiver.

Converting Model RT-1 Operation Mode

Momentary to Latching Operation via Jumper

Instructions to convert the receiver from momentary to latching operation by adjusting a jumper.

Model RT-1 Latching Operation Conversion

Latching Operation via Slide Switch

Instructions to convert the receiver to latching operation using a slide switch.