Alaterre Furniture Tahiti Vanity User Manual

4/12/17 1 of 3 Tahiti
Alaterre Furniture
Step 1
Read through these instructions thoroughly before beginning installation.
NOTE: Although the average consumer can install this product, we recommend you consult
with a trade professional if you have any questions or concerns.
Tahiti Vanity
Thank you for purchasing a Bath Vanity from Alaterre Furniture. Installation of this product
requires a Level, drill & screwdriver. It is helpful to have a second person present when
installing your vanity.
Vanity Installation Instructions
PARTS
2
A
NO.
DRAWING
DESCRIPTION
Q'TY
VANITY CASE
1
B
LEVELER
C 4
WOOD SCREW
D
KNOB
2
E
2

Alaterre Furniture Tahiti Vanity Specifications

General

Brand	Alaterre Furniture
Model	Tahiti Vanity
Category	Indoor Furnishing
Language	English

Summary

Vanity Installation Instructions

Step 1: Preparation and Initial Reading

Read all instructions thoroughly before starting installation. Consult a professional if needed.

Step 2: Unpacking and Hardware Check

Remove the vanity and all hardware from the packing material before installation.

Step 3: Positioning and Leveling the Vanity

Place the vanity in its final location and use the adjustable levelers to ensure it is level and plumb to the wall.

Step 4: Locating Wall Studs and Drilling Pilot Holes

Identify wall studs behind the vanity and drill pilot holes in the stretcher rail for secure mounting.

Step 5: Securing the Vanity to the Wall

Use screws (B) to firmly attach the vanity to the wall, aligning with the previously drilled pilot holes in the studs.

Step 6: Attaching Knobs to Doors

Attach the knobs (D) to the vanity doors using the provided screws (E).

Care and Maintenance

Clean the vanity with mild soap and water, then wipe dry for optimal care.

Ordering Replacement Parts

Order replacement parts and hardware directly from 'alaterrefurniture.com' for faster service.