To Next PageTo Next Page
Need help?Do you have a question about the ALAULM 1014WMGazebo24 and is the answer not in the manual?
Details about the Corner Gazebo with Sun Visor and customer service contact information.
Emphasizes the importance of reading the user guide before commencing assembly.
Provides detailed measurements of the gazebo's height, width, and overall dimensions.
Lists necessary tools and highlights the need for five people for assembly.
Advises on actions for heavy weather and snow accumulation on the roof.
Provides steps for contacting customer service for product issues and damages.
Key points to follow before and during assembly, including screw tightening and part verification.
Illustrates all parts of the gazebo in an exploded format for identification.
Lists and quantifies parts A1-A5, D5-D9, J2, J4, T1-T2, T5-T7, L1.
Lists and quantifies parts B1-B4, C3-C5, D7, D10, E1-E2, F1-F4, H1-H2, J1, J5-J7, L2, M1-M4.
Lists and quantifies parts M4, P1-P5, S, T, V, Y1-Y3, Q, Q1-Q4, V1, U1.
Details hardware like bolts, nuts, washers, and included tools like wrenches.
Connects rear column parts (A1, A2, A3) using inserts (J1), ferrules (T), and screws (FF) with caps (EE).
Attaches rear and front spike covers (M3, M4) to columns (A2, A4, A5) using spike tabs (M1, M2) and screws (FF).
Joins left and right crossbars (B1-B4) using inserts (J2) and screws (FF).
Installs mosquito net tubes (T1, T2) with rings (HH), triangular supports (J5), and ferrules (J6) using screws (FF, AA).
Connects center beams (C3, C4, C5) using insert (J4) and screws (FF).
Fastens rear crossbars (D5, D6) and beam (D7) using inserts (J2) and beam stoppers (S) with screws (FF).
Secures front crossbars (D8, D9, D10), net tubes (T5, T6, T7), ferrules (J6), and stoppers (S) with screws (FF, AA).
Connects columns (A1, A5, A3, A4) to crossbars (B1-B4) with screws (KK, GG) and adds diagonal braces (H1, H2) with caps (LL).
Fixes rear columns (A1, A2, A3) to crossbars (D5-D7) and front columns (A4, A5) to crossbars (D8-D10) with screws (KK, GG).
Attaches center beams (C3, C4, C5) to supports (J5) and corner stoppers (J7) to crossbars (B1, B3, D8, D9) with screws (FF, AA).
Connects side beams (F1-F4) using connectors (Y1) and fastens them with screws (GG).
Attaches side beams (F1-F4) to the bottom frame with screws (FF) and connecting pieces (Y2) to center beams (C3-C5) with screws (GG).
Clamps long and short intermediate beams (E1, E2) together using clamping (Y3) and fastens with screws (NN).
Attaches intermediate beams (E1, E2) to the frame using stoppers (S) and connecting pieces (Y2) with screws (GG).
Installs the four sunlight panels (Q1, Q2, Q3, Q4) by sliding them forward along the beam channel.
Attaches sun panels (Q) to middle stoppers (L2) and panel strips (L1) after removing protective film.
Nudges the assembled sun panels upwards, ensuring panels near the rear column are on the top layer.
Attaches rear stoppers (P1, P2), sidebar stoppers (P3), and center beam stoppers (P4, P5) using screws (GG).
Optionally fixes retainer plates (V) with screws (FF) and secures posts to the ground with nails (PP) and expansion screws (UU).
Hangs the mosquito net (V1) onto the mosquito net rings (HH) and attaches corners with sticky tape.
Hangs the surrounding cloth (U1) onto the mosquito net rings (HH) and attaches corners with sticky tape.
General| Brand | ALAULM |
|---|---|
| Model | 1014WMGazebo24 |
| Category | Outdoor Furnishing |
| Language | English |
