To Next PageTo Next PageWhat to do if my Alba Set-top box remote does not respond?
If your Alba Set-top box remote isn't responding, the batteries might be inserted incorrectly or may be dead. First, check that the polarities of the batteries match the markings inside the battery compartment and that they are correctly inserted. If that doesn't work, try replacing the batteries with new ones.
How to fix no display on Alba Set-top boxes?
If there is no display on the TV screen when using your Alba Set-top box, it could be due to no power or an unplugged cable. Ensure that the mains plug is correctly connected to the socket and check the cable connections at both the TV and the unit.
Why does my Alba Set-top box say “No Signal”?
If your Alba Set-top box displays a “No Signal” message, several factors could be responsible. The aerial installation may not be working, or the aerial cable might not be properly connected. It's also possible that the transmission signal isn't being broadcast, or the program setup is incorrect. To resolve this, try re-installing the aerial setup, checking the cable connections, trying again later, or verifying the settings in the installation menu.
General| USB Port | Yes |
|---|---|
| EPG | Yes |
| Type | Set-top box |
| Connectivity | HDMI |
| Video Decoding | MPEG-2 |
| Output Interface | HDMI |
Overview of the remote control buttons and their functions for operating the set-top box.
Guide to connecting the set-top box to the TV and aerial for initial setup.
Instructions for inserting batteries into the remote control for proper operation.
Initial setup and first-time power-on procedures for the set-top box.
Using the on-screen guide to view program schedules for the next seven days.
Managing and using the set-top box for digital television broadcasts.
Accessing tools to organize channels, mark favorites, and add descriptions.
Functionality to organize channels within the channel manager.
Methods for installing and scanning for digital TV channels (Auto/Manual).
Restoring the unit to its original factory default settings.
