Alcad TED-001 User Manual

9600007 TED-001 TÉLÉPHONE NUMÉRIQUE
9600010 TED-002 TÉLÉPHONE NUMÉRIQUE 2 BOUTONS
Téléphone mural avec appel électronique et secret de communication
pour systèmes de portiers et vidéoportiers numérique.
La connexion se fait avec un BUS de communication à 2 fils sans polarité
de connexion.
Le téléphone possède un bouton sur le côté pour louverture des portes
(1) et régler le volume de lappel. Le téléphone TED-002 (9620010)
possède également un bouton poussoir auxiliaire (2) pour gérer des
éléments additionnels (gâche dun seconde porte,...).
Pour son fonctionnement il est nécessaire de lui donner un code qui
permet son identification à lintérieur de linstallation (programmation
du téléphone). Ce code est mémorisé dans la mémoire du téléphone,
non volatil. Il est possible dinstaller jusquà 4 (téléphones et moniteurs)
numériques avec le même appel.
9600007 TED-001 DIGITAL TELEPHONE
9600010 TED-002 DIGITAL TELEPHONE 2 PUSH-BUTTONS
Wall telephone with electronic Wall phone with electronic call and
confidentiality feature for installations of both digital door entry systems
and digital video door entry systems. The connection system is as follows:
a 2 wires communication BUS, without connection polarity.
The telephone has a side pushbutton to open the door (1) and a call
volume control. The TED-002 telephone (9600010) is also equipped
with and auxiliary function button (2) which is used to control additional
elements (e.g. the opening of a second door,...).
For its operation it is necessary to assign a code to each phone that can
identify it within the installation (programing the telephone). This code
is stored in the non-flash memory of the telephone. It is possible to install
up to 4 digital (telephones and monitors) per house or flat on the same
call line.
9600007 TED-001 TELÉFONO DIGITAL
9600010 TED-002 TELÉFONO DIGITAL 2 PULSADORES
Teléfono mural con llamada electrónica y secreto de comunicación para
sistemas de portero y videoportero digital. La conexión comprende un
BUS de comunicación de 2 hilos, sin polaridad de conexión.
El teléfono dispone de botón lateral para apertura de puerta de calle
(1) y regulador de volumen de llamada. El teléfono TED-002 (9600010)
dispone adicionalmente de un pulsador auxiliar (2) para funciones
adicionales (apertura segunda puerta,...).
Para su funcionamiento es necesario asignarle un código que permita
identificarlo dentro de la instalación (programación del teléfono). Este
código queda almacenado en la memoria no volátil del teléfono.
Es posible instalar hasta 4 equipos (teléfonos y monitores) por vivienda,
con la misma llamada.
50.6 mm
84 mm
224 mm
2
1
TELÉFONOS DIGITALES
DIGITAL TELEPHONES
TÉLÉPHONES NUMÉRIQUES
PORTERO DIGITAL - DIGITAL DOOR ENTRY SYSTEM - PORTIER NUMÉRIQUE

Alcad TED-001 Specifications

General

Brand	Alcad
Model	TED-001
Category	Intercom System
Language	English

Summary

Digital Telephones Overview

TED-001 Digital Telephone

Wall telephone with electronic call and confidentiality feature for digital systems.

TED-002 Digital Telephone 2 Push-buttons

Includes an auxiliary function button for controlling additional elements.

Assembly Instructions

Disconnect Cord and Receiver

Step 1: Detach the telephone cord between the base and the receiver.

Move Telephone Base Cover

Steps 2-3: Slide the telephone base cover to the right and remove it.

Route Cables and Fix Base

Steps 4-5: Pass connection cables through the opening and fix the base to the wall.

Make Electrical Connections

Step 6: Perform the electrical connections as per instructions.

Program Telephone and Adjust Volume

Steps 7-8: Program the telephone according to instructions and adjust call volume.

Close Telephone and Leave Manual

Steps 9-10: Close the telephone with the screw and leave the manual as indicated.

Connection Instructions

Connection Scheme A

Shows parallel connection for audio units without polarity.

Connection Scheme B

Illustrates parallel connection for telephones.

Auxiliary Button Connection

TED-002 Auxiliary Function Operation

Explains the operation of the TED-002 auxiliary function button via the communication BUS.

Programming Instructions

Programming Overview and Requirements

Explains programming source from the main entrance panel and system prerequisites.

Programming Steps

Detailed step-by-step guide for programming the telephone via the main panel.

Programming Steps with Diagrams

Visual guide to programming steps, including maximum time limits.

Technical Characteristics

Terminal Specifications

Details voltage ranges for D1, D2 terminals in inactive and working states.

Operating Temperature

Specifies the operating temperature range for the equipment.

Declaration of Conformity

Manufacturer and Product Details

Provides manufacturer's name, address, product name, and model numbers.

Compliance Standards and Directives

Lists safety and EMC directives the product complies with.