Alcatel-Lucent Enterprise 8378 DECT IP-xBS

Need help?

Do you have a question about the Alcatel-Lucent Enterprise 8378 DECT IP-xBS and is the answer not in the manual?

Summary

1 Overview

4 Solution components description

4.1 8378 DECT IP-xBS hardware

Details the indoor and outdoor hardware versions of the 8378 DECT IP-xBS.

4.2 ALE compatible Call Servers

Explains compatibility with OXO CONNECT EVOLUTION CS and OXO CONNECT CS.

4.3 DECT handsets

Lists supported ALE AGAP and GAP DECT handsets, and third-party options.

5 Wizard OXO

5.1 IP-xBS PARI creation

Explains how to obtain and configure PARI numbers from the ALE Business Portal for up to 80 xBS.

5.2 xBS auto-discovery

Describes the automatic discovery of xBS on the IP network by the call server, requiring minimal configuration.

5.3 Automatic air synchronization

Explains time alignment of DECT base stations using air synchronization for roaming and handover.

7 Possible Deployment Topologies

8 How to configure the solution

8.2 Dynamic or Static IP parameters

Explains using DHCP or static IP parameters for xBS configuration, including methods for static setup.

8.7 QoS

8.9 Call server configuration

Outlines the steps for simple IP-xBS deployment via OMC, including DHCP, PARI, and auto-provisioning.

9 DECT handsets compatibilities

10 How to assess a simple deployment

11 Troubleshooting tools

11.1 xBS LED state description

Summarizes the various LED states and behaviors during the xBS start-up and operation phases.

11.2 Serviceability tools existing on OXO;OMC (webdiag)

11.3 IP troubleshooting tools

12 Frequently Asked Questions