Do you have a question about the Alcatel-Lucent Enterprise OmniSwitch 6865 and is the answer not in the manual?
Specifications, front panel, and rear panel of the P16X model.
Specifications, front panel, and rear panel of the U12X model.
Specifications, front panel, and rear panel of the U28X model.
Pre-installation checks, ambient temperature, airflow, mechanical loading, and grounding.
Specifies minimum clearances for optimal airflow and operation.
Instructions for assembling power supply trays, covering side mount.
Specific instructions for assembling the rear power supply tray.
Steps for attaching rack mount flanges and table mount feet.
Procedures for installing power supplies in side and rear mount trays.
Guidelines for rack and table mounting the switch chassis.
Explains the meaning of different LED states during boot and operation.
Guides through the first login, default credentials, and basic setup.
Procedures for unlocking remote sessions and changing the admin password.
Configuration of time zone, date, time, administrative contact, name, and location.
Command to save current switch configuration settings to memory.
Specifications, front panel, and rear panel of the P16X model.
Specifications, front panel, and rear panel of the U12X model.
Specifications, front panel, and rear panel of the U28X model.
Pre-installation checks, ambient temperature, airflow, mechanical loading, and grounding.
Specifies minimum clearances for optimal airflow and operation.
Instructions for assembling power supply trays, covering side mount.
Specific instructions for assembling the rear power supply tray.
Steps for attaching rack mount flanges and table mount feet.
Procedures for installing power supplies in side and rear mount trays.
Guidelines for rack and table mounting the switch chassis.
Explains the meaning of different LED states during boot and operation.
Guides through the first login, default credentials, and basic setup.
Procedures for unlocking remote sessions and changing the admin password.
Configuration of time zone, date, time, administrative contact, name, and location.
Command to save current switch configuration settings to memory.
| Model | OmniSwitch 6865 |
|---|---|
| Layer | Layer 3 |
| Uplink Ports | 4 x 10G SFP+ |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 131 Mpps |
| Operating System | AOS (Alcatel-Lucent Operating System) |
| Relative Humidity | 5% to 95% non-condensing |
| Management | CLI, Web, SNMP |
| Features | IPv4/IPv6 |
| Form Factor | 1U Rack-mountable |
| MAC Address Table Size | 32, 000 |
| Jumbo Frame Support | Yes |
| Storage Temperature | -40°C to 70°C |
| VLAN Support | Yes |
| QoS | Yes |
| Security Features | ACL |
| Warranty | Lifetime |
| Power over Ethernet (PoE) | IEEE 802.3at PoE+ (on some models) |
| Redundancy | Optional Redundant Power Supply |