Alcatel-Lucent OmniSwitch 6850-48 - Managing OmniSwitch 6850 Series Stacks

Using SNMP SNMP Overview
OmniSwitch AOS Release 6 Switch Management Guide September 2009 page 3-45
ifIndex—The interface index.
ddmNotificationType—The trap type for monitored DDM parameters (clearViolation(1), highAlarm(2),
highWarning(3), lowWarning(4), lowAlarm(5).
ddmTxBiasCurrent—The current Transmit Bias Current of the SFP/XFP in 10s of milli-Amperes (mA).
145 ddmTxPowerThresholdViolated ifIndex
ddmNotifica-
tionType
ddmTxOutput-
Power
port This trap is sent when an SFP/
XFP/SFP+ Tx output power has
crossed any threshold or reverted
from previous threshold violation
for a port represented by ifIndex.
It also provides the current real-
time value of SFP/XFP/SFP+ Tx
output power.
ifIndex—The interface index.
ddmNotificationType—The trap type for monitored DDM parameters (clearViolation(1), highAlarm(2),
highWarning(3), lowWarning(4), lowAlarm(5).
ddmTxOutputPower—The current Output Power of the SFP/XFP in 10s of milli-Watts (mW).
146 ddmRxPowerThresholdViolated ifIndex,
ddmNotifica-
tionType
ddmRxOpti-
calPower
port This trap is sent when an SFP/
XFP/SFP+ Rx optical power has
crossed any threshold or reverted
from previous threshold violation
for a port represented by ifIndex.
It also provides the current real-
time value of SFP/XFP/SFP+ Rx
optical power
ifIndex—The interface index.
ddmNotificationType—The trap type for monitored DDM parameters (clearViolation(1), highAlarm(2),
highWarning(3), lowWarning(4), lowAlarm(5).
ddmRxOpticalPower—The current Received Optical Power of the SFP/XFP in 10s of milli-Watts (mW).
No. Trap Name Objects Family Description