Need help?Do you have a question about the Alcatel-Lucent OmniSwitch 6850-48 and is the answer not in the manual?
General| Model | OmniSwitch 6850-48 |
|---|---|
| Product Type | Switch |
| Ports | 48 |
| Switching Capacity | 176 Gbps |
| VLANs Supported | 4096 |
| Jumbo Frame Support | Yes |
| Jumbo Frame Size | 9216 bytes |
| Power Supply | AC or DC |
| Uplink Ports | 4 x 10 Gigabit Ethernet (SFP+) |
| MAC Address Table Size | 32, 000 |
| Routing Protocol | OSPF, BGP |
| Management | CLI, Web, SNMP |
| Dimensions (W x D x H) | 440 mm x 420 mm x 44 mm |
| Dimensions | 17.3 in x 16.5 in x 1.73 in |
| Operating Temperature | 0°C to 50°C |
| Operating Humidity | 10% to 90% (non-condensing) |
Lists all supported OmniSwitch 6850 Series models.
Outlines manuals for different stages of configuration.
Provides contact information for technical assistance.
Details hardware and software safeguards for continuous operation.
Describes common network deployment scenarios for the series.
Overview of different OmniSwitch 6850 chassis models.
Lists detailed hardware specifications for various models.
Instructions for tabletop and rack-mount installation.
Details available power supply units and valid configurations.
Lists general specifications for PoE support.
Explains how to set PoE operational status and port parameters.
Details the function of priority disconnect for PD power management.
Defines primary, secondary, and idle roles in a stack.
Covers connecting switches using stacking cables for redundancy.
Explains how to reload switches in different stack roles.
States compliance with EU directives.
Lists safety and EMC standards the product adheres to.
To Next Page