Alcatel-Lucent OmniSwitch 6850-48 - Page 307

OmniSwitch AOS Release 6 Switch Management Guide September 2009 Index-1
Index
Symbols
!! command 6-10
A
aaa authentication command 9-7, 9-8, 9-10, 10-5
aaa radius-server command 9-7
accounting
for Authenticated Switch Access 9-12
ACE/Servers 9-4
application examples
applying configuration files 7-4
Authenticated Switch Access 9-7
CLI 6-7, 6-23
CMM 5-5
configuration file 7-2
customer login user accounts 8-7
Emergency Restore 5-30
file management 1-30
logging into the switch 2-4
network administrator user accounts 8-6
NTP 4-3
Prefix Recognition 6-12
SNMP 3-4
Trap Filters 3-5
WebView 10-5
applying configuration files
application examples 7-4
ASA
see Authenticated Switch Access
ASA Configuration
verify information about 9-13
Authenticated Switch Access 9-4
accounting 9-12
application examples 9-7
management interfaces 9-9
authentication
MD5 3-47
SHA 3-47
traps 3-50
B
banner
login 2-20
pre-login text 2-21
boot.cfg file 5-3, 5-15
Emergency Restore 5-30
C
cd command 1-9
certified directory 5-3
copying to working directory 5-21, 5-26
Chassis Management Module
see CMM
chmod command 1-16
CLI 6-1
application examples 6-7, 6-23
domains and families 8-17
logging commands 6-15–6-16
specifications 6-2
CLI usage
verify information about 6-24
CMM 5-1
application examples 5-5
boot.cfg file 5-3
cancelling a reboot 5-14, 5-19, 5-24
certified directory 5-3
checking reboot status 5-14
configuration files 5-3
copying
certified directory to working
directory 5-21, 5-26
running configuration to working
directory 5-15
working directory to certified
directory 5-20, 5-25
displaying current configuration 5-22, 5-29
displaying switch files 5-23
image files 5-3
managing 5-13
rebooting 5-13, 5-24
rebooting from the working directory 5-17, 5-25
running configuration 5-3, 5-4
scheduling a reboot 5-14, 5-24
specifications 5-2
swapping primary for secondary 5-28
synchronizing primary and secondary 5-25, 5-26
working directory 5-3
CMM Conditions
verify information about 5-31
CMM scenarios 5-5
lost running configuration 5-5
rollback to previous software 5-8
running configuration saved to working directory 5-6
working directory saved to certified directory 5-7
Command Line Interface
see CLI
community strings 3-46
configuration apply command 7-2, 7-4
for a specific timeperiod 7-5
configuration cancel command 7-7
configuration error-file limit command 7-8
configuration file
application examples 7-2
specifications 7-2