All rights
reserved. Passing on and copying of this document, use and
communication of its contents not permitted without written authorization from
HAN-Networks.
When the LED on AP would be in “Green Blinking” state, a SSID named with “AP-
xx:xx” (xx:xx is the last 4 characters of the AP MAC address) will be able to detected
and connected. After associated with this WLAN SSID, the AP Web Based
Management page would be able to reached via below default URL: http://mywifi.al-
enterprise.com:8080/
or http://<AP_IP_Address>:8080/
. After login with the default account (user: Administrator / Password: admin), the “
configuration wizard
”
would be displayed on WBM configuration, user may follow the wizard to configure
the AP.
For more details, please refer to the QSG document of each AP model.
In case of some abnormal situation, below methods could help to make the AP back
to “factory settings”:
• Long pressing the “reset” button
• Command “
firstboot
” + “
reboot
” input via Console or SSH connection
• Click “
Clear All Configuration
” from “
WBM -> AP Configuration
”
3.3 OV Cloud Mode
Stellar APs could be centralized managed by OmniVista Cirrus. A default OVC Server URL is
built-in AP software. The AP will be switched to OVC mode automatically when below two
conditions are met:
• AP network is able to reach the built-in OVC Server URL
• The AP hardware information has been correctly configured in OVC Server.
For more details, please refer to the related guides or documents of OmniVista
Cirrus.
To Next Page
Loading...
