All rights
reserved. Passing on and copying of this document, use and
communication of its contents not permitted without written authorization from
HAN-Networks.
6.1.3.2 For R3.0.4 Build
There are two methods to collect the logs:
A. Use the script "take_snapshot_v1.4.sh", the same as R3.0.3 Build.
B. Use the GUI Tools.
For Express mode, refer to below screenshot:
For Enterprise mode, it supports in R3.0.4MR2 or later build, see below screeshot
✓ Enable "AP Web" first.
To Next Page
Loading...
